Union Community VIRDI 3000 Bedienungsanleitung PDF herunterladen (Seite 36)

VIRDI 4000

User’s Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,

Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,

E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.5.2.1. Settings for ID display when authentication is successful.

◆ [*]  [3]  ◆[2]

(0-2):0

Default setting: ‘0’

If set to the default setting ‘0’, only the “Success” message is displayed. When

set to ‘1’, the user ID is displayed in the LCD window when authentication is

successful; as shown below. When set to ‘2’, the user name appears in the

LCD window when authentication is successful; as shown below.

Example: OK! <0001>

Example: Smith, you are authorised.

Press [ENTER] to move to the next setting.

3.5.2.2. Settings for card authentication only.

◆ [*]  [3]  [2]  [ENTER] ◆

(N=0/Y=1):0

Default setting: ‘0’

If a user is registered to be authenticated with a Card & Password, or a Card

& Fingerprint, and if set to ‘1’, they can only get access to an area, via the

relevant terminal, by using a card.

This function is useful at a building entrance door – and other positions in a

building with several installed terminals - where there is frequent entry and

exit and no need for high security access control.

Press [ENTER] to move to the next setting.

3.5.2.3. 1:N authentication settings

◆ [*]  [3]  [2]  [ENTER]  [ENTER] ◆

(N=0/Y=1):0

Default setting: ‘1’

This enables fingerprint authentication without inputting a user ID, or using a

card. For your information, even if a user is registered to be authenticated with

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Keine Kommentare

Union Community VIRDI 3000 Bedienungsanleitung Seite 36